User Guide
Introduction
4
AXB-PT15 PosiTrack Camera Controller
Refer to the PosiTrack Unit Lens Compatibility table on page 1. Four solid state relays are also
provided to control the zoom, focus, and iris speed/position mode selection and iris local/auto
selection on the Fujinon MD series and Canon KTSA series lenses.
Sample Product Application
FIG. 2 shows a sample camera control application using the AXB-PT15.
FIG. 2 Sample AXB-PT15 camera product application
RS-232 / 422 AXlink PWR
12VDC
RX
CTS2
RTS2
V
RX2
TX2
GND
TX
TX
485EN
RX
TX1
GND
RX1
RS-232
PWR
AXM
GND
AXP
AMX ABS (AXlink Bus Strip)
AMX AXB-PT15
PC or other
RS-232
controller
AMX AXB-PT15
AMX AXP-PLV
AMX AXB-EM232 (rear view)
AXlink
AXlink
PWR cable
PWR cable
PWR cable
Application #1 - AXlink
Application #2 - RS-232
Local 12 VDC
power supply
12 VDC
Power Supply
12 VDC
Power Supply
Use a separate power supply to power each PosiTrack unit. Power to the PosiTrack
unit is supplied from the external power supply to the unused power pin on the
PosiTrack unit’s AXlink connector.
The AXB-PT5 unit requires the use of a 12 VDC-compliant power supply which meets
the power requirements outlined within the Specifications table on page 2.