Instruction manual

Introduction
5
AXB-PT10/15/30 PosiTrack Camera Controllers
Sample Product Application
FIG. 2 shows a sample camera control application using the AXB-PT10.
FIG. 2 Sample AXB-PT10 camera product application
RS-232 / 422 AXlink PWR
12VDC
RX
CTS2
RTS2
V
RX2
TX2
GND
TX
TX
485EN
RX
TX1
GND
RX1
RS-232
PWR
AXM
GND
AXP
AMX ABS (AXlink Bus Strip)
AMX AXB-PT10
AMX Local
Power Supply
AMX PS2.8
Power Supply
PC or other
RS-232
controller
AMX AXB-PT10
AMX Local
Power Supply
AMX AXP-PLV
AMX AXB-EM232 (rear view)
AXlink
AXlink
PWR cable
PWR cable
PWR cable
Application #1 - AXlink
Application #2 - RS-232
Use a separate power supply to power each PosiTrack unit. Power to the PosiTrack
unit is supplied from the external power supply to the unused power pin on the
PosiTrack unit’s AXlink connector.
The AXB-PT10 unit requires a PSN2.8 or PSN6.5 power supply.
The AXB-PT15 and AXB-PT30 units require a PSN6.5 power supply.