Technical data

CommandTouch User’s Handbook F-3
8 Plug the other end of the 9-pin to 9-pin download cable into the PROGRAM port
on the front panel of the AXB-EM232 controller box, which is rack mounted
inside the TC system. See Figure F-2 for an illustration of the cables you need to
connect.
9 When you have completed the above steps, press C to continue or press A to abor
the upgrade process.
10 The download process will begin. The Touch Panel should be displaying
“Receiving File” message.
11 When the download process is complete, the message “Update is now complete” is
displayed.
12 Unplug the 9-pin to 9-pin download cable from the AXB-EM232 and TC codec.
Store the cable for use in downloading future enhancements.
13 Reconnect cable 605-1441-01 to the COM1 port on the TC codec.
14 Reboot your TC system.
Refer to this CommandTouch User’s Handbook for more information about the new
enhancements.
If you experience problems with this installation, please contact your service
representative or the Technical Assistance Center at 1-800-856-8835.