Technical data

This button turns the double beep sound
on or off. The double beep sounds when
a user presses outside a defined button.
This button is used for diagnostic
purposes. It determines whether the
program loaded in the controller matches
the standard hardware configuration.
When pressed, a new page appears with
either of the following messages:
ALL PROGRAMMED DEVICES ARE PRESEN
Or,
NO EXTRA DEVICES ARE PRESENT
This button is used for diagnostic
purposes. It shows all the devices that are
present. In a standard hardware
configuration, Device One will be the
codec, Device Two will be the tablet and
Device 128 is the touch panel.
The bottom row of buttons provides
system information.
The serial number appears in the lower
right-hand corner.
Next to the serial number is the AXLINK
button. It will flash once per second if the
connection between the touch panel and
the controller is operational.