Technical data

26 CommandTouch User’s Handbook
Picture In Picture Control (PIP)
Note: This facility controls the PIP
window on the Local Site only. You do
not have control over the Remote Site’s
PIP window.
The PIP function allows you to view two
separate video displays at the same time
on a single video monitor. By default on
a two-monitor system, the PIP window
displays the video you are sending to the
remote site. The monitor displays the
remote video source. By default on a one-
monitor system the PIP window displays
the video you are sending to the remote
site. The monitor displays the remote
video source, Windows
®
95, or PenPal for
Windows.
On the LC
,
PIP windows are
available on two-monitor
systems only if the PIP option
has been purchased for your
system.
ON/OFF Button
On LC systems, when the PIP ON/OFF
button is pressed, it is illuminated, and
the main video monitor displays a
window containing a picture of the video
you are sending to the remote site. Press
the PIP ON/OFF button again – the
window disappears and the touch panel
button dims.
On LC systems, the only PIP capability
available is turning PIP off and on with
the PIP ON/OFF button.
LC PIP Interface