Technical data

CommandTouch User’s Handbook 23
A preset button automatically selects a
certain camera or moves a camera to a
previously stored position, including
associated zoom and focus refinements.
A call must be established to set a preset
for a remote camera.
To
select a preset, press and release the
desired preset button.
To
store a preset, select the desired
camera. Use the camera controls to select
the view, including zoom and focus
adjustments if the camera supports pan,
tilt, and zoom functions. Press and hold
the preset button that you want to set.
When the preset button double-flashes,
the preset has been stored.
You cannot set a remote
camera’s preset if the remote
site does not support camera
control.
You may use these buttons to control the
pan, tilt, and zoom adjustments of the
selected remote camera.
The Camera Control buttons are
used only with cameras which
support pan, tilt, and zoom
operations.