Technical data

10 CommandTouch User’s Handbook
Note: You can substitute another entry
onto an existing SPEED-DIAL SITE
button by following Steps 1–3 above.
Dialing with the SPEED-DIAL Menu
There are two dialing methods that you
can use in the SPEED-DIAL menu.
• Speed Dial with the SPEED-DIAL SITE
button. (See previous page for SPEED-
DIAL SITE button setup instructions.)
• Dial from the SPEED-DIAL List.
Dial with the SPEED-DIAL SITE BUTTON
Once you have set up the SPEED-DIAL
SITE button with the entry from the
SPEED-DIAL list, touch the SPEED-
DIAL SITE button to initiate a
conference call. As soon as you touch the
button, the number on the SPEED-DIAL
SITE button will be dialed and a
conference call will be initiated.
Dial from the SPEED-DIAL Lis
To dial directly from the SPEED-DIAL
list, do the following:
1
Use the UP and DOWN arrow buttons
under the SPEED-DIAL list to
highlight the entry.
2
Press the DIAL button under the
SPEED-DIAL list to initiate a call.
After the call is connected, the touch
panel reverts to the MAIN menu page.
When you return to this page, you can use
the HANGUP Button to end the call.
SPEED-DIAL List Entries
SPEED-DIAL SITE buttons
UP and DOWN
arrow buttons
PAGE UP and
DOWN buttons
(scrolls up and
down 10 entries
at a time)