Technical data

CommandTouch User’s Handbook 9
SPEED-DIAL Menu
Use the SPEED-DIAL button to access
the SPEED-DIAL menu. From the
SPEED-DIAL menu, you can also access
the HAND-DIALER menu to manually
dial a site. On LC systems you can also
access the TELEPHONE menu to add an
audio-only caller to a conference call.
You must use the Address Book facility
in AppsView to enter addresses that will
then be available for your use in the
CommandTouch SPEED-DIAL list (the
scrollable list on the left side of the
SPEED-DIAL menu).
Setting Up SPEED-DIAL SITE Buttons
On the right side of the SPEED-DIAL
menu are a group of buttons called
SPEED-DIAL SITE buttons. These
buttons are blank until you move a site
list entry from the SPEED-DIAL list on
the left side of the page to a SPEED-
DIAL SITE button on the right side of the
page.
As an example, suppose you
videoconference with your Dallas office
frequently and you wish to set up a
SPEED DIAL SITE button for that
office:
1
Use the UP and DOWN arrow buttons
under the SPEED-DIAL list to highlight
the Dallas entry.
2
Hold a blank SPEED-DIAL SITE button
down until the button flashes six times.
3
The Dallas entry highlighted on the
SPEED-DIAL list now appears on the
SPEED-DIAL SITE button you selected.
SPEED-DIAL List Entries
SPEED-DIAL SITE buttons
UP and DOWN
arrow buttons