Technical data

2 CommandTouch User’s Handbook
System Start-up And Touch Panel
Operatio
During the EnterpriseSeries TC or LC
power-up sequence, system status
information is displayed on the main
video monitor. During this time, do not
attempt to use the CommandTouch panel.
When the TC or LC Systems’ beginning
VTEL logo page is displayed on the
monitor, the CommandTouch panel
functions can be activated.
The CommandTouch panel is a touch-
sensitive device. Menu buttons displayed
on its screen respond to fingertip
pressure. When the CommandTouch
panel is activated after a system boot, the
VTEL logo page is automatically
displayed on the touch panel screen, and
the entire screen surface responds as a
“start” button.
Press anywhere on the screen to start, and
the touch panel displays the MAIN menu.
If only the codec (and not the
entire system) is rebooted, the
menu displayed on the
CommandTouch screen remains
unchanged. When the codec is
finished reloading, the words
“Loading CommandTouch”
will flash on the video monitor
screen. CommandTouch
features will then be available.
The CommandTouch panel enables
precise control of EnterpriseSeries TC