Instruction manual
Programming
36
AXB-PT10/30 PosiTrack Camera Controllers
Levels
The following table lists the Axcess levels.
Example of sending levels:
SEND_LEVEL 90,1,200
90=DEVICE
1=FUNCTION (ZOOM,FOCUS,PAN,TILT)
200=LEVEL
Send_Commands
The following table lists parameters for the PosiTrack Camera Controllers Positional
Send_Commands.
Levels
Level values Axcess level
1Pan
2 Tilt
3 Zoom
4 Focus
5 Pan POT (Encoder)
6 Tilt POT (Encoder)
7 Zoom POT
8 Focus POT
Parameters - Send_Commands
Parameters Description
Outputs
1—PAN
2—TILT
3—ZOOM
4—FOCUS
5—IRIS
Level 0 (lowest) to 255 (highest) or 0% to 100%
On pan, tilt, and PWM drives for zoom, focus, and iris, level 128
will be OFF. Level 129 and above are for the forward direction.
Level 127 and below are for the reverse direction.
Time (optional)
If specified, 0 to 255 in tenths of a seconds; if not specified, at
current rate.
Position
0 to 255; value of POT input. Corresponds to a position of the
unit. 0 is one end of the POT and 255 is the other end. Not
directly related to an output level voltage.
0 to 65535 when using the 'AD MODE x 10' command, or for pan/
tilt commands. Corresponds to a position of the unit. 0 is one end
of the POT and 65,535 is the other end. Not directly related to an
output level voltage.
Speed
0 to 127; where 0 is slowest and 127 is fastest (default).