Instruction manual

Table of Contents

XB-PT10/30 PosiTrack Camera Controllers

Table of Contents

Introduction ...............................................................................................................1

Specifications .................................................................................................................... 1

Lens Control Modes .......................................................................................................... 3

Servomotor Mode..................................................................................................................... 3

Motor Mode .............................................................................................................................. 3

Pan and Tilt Control........................................................................................................... 3

Zoom, Focus, and Iris Control ........................................................................................... 4

Sample Product Application .............................................................................................. 4

Pre-Installation ..........................................................................................................5

Configuration Settings ....................................................................................................... 5

Setting zoom, focus, and iris switches to servomotor or motor mode...................................... 6

Setting the RS-232 DIP switch (S2) ......................................................................................... 6

Setting the AXlink Device DIP switch (S5) ............................................................................... 7

Accessing the AXB-PT10 Internal Jumpers ...................................................................... 8

Accessing the AXB-PT30 Internal Jumpers ...................................................................... 9

Setting the Internal Jumper Communication Mode ......................................................... 10

Configuring An External Camera/Lens Power Supply..................................................... 11

Installation ...............................................................................................................13

Mounting the PT10 and PT30 ......................................................................................... 13

PT10 Camera/Lens Mounting and Balancing.................................................................. 15

PT30 Camera/Lens Mounting and Balancing.................................................................. 17

Wiring the Connectors..................................................................................................... 18

Wiring Guidelines ............................................................................................................ 19

Preparing captive wires.......................................................................................................... 20

Using the AXlink connector for data and power ..................................................................... 20

Using the AXlink connector with an external RS-232 control device or PC (Stand-Alone only) 21

Using the RS-232 DB-9 connector......................................................................................... 21

Preparing the PosiTrack Controllers for communication........................................................ 22

Using the lens control DB-15 HD (high density) connector.................................................... 22

Pan Characteristics ......................................................................................................... 23

Setting the adjustable pan-limit stops .................................................................................... 23

Tilt Characteristics........................................................................................................... 24

Setting the adjustable tilt-limit stops....................................................................................... 24

Programming ..........................................................................................................25

Configuration Commands................................................................................................ 25