Specifications

IMPORTANT SAFETY
INFORMATION AND
INSTRUCTIONS
When using and installing your AMX AutoPatch
product, adhere to the following basic safety
precautions. For more information about
operating, installing, or servicing your AMX
AutoPatch product see your product
documentation.
ä
Read and understand all instructions before
using and installing AMX AutoPatch
products.
ä
Use the correct voltage range for your AMX
AutoPatch product.
ä
There are no user serviceable parts inside an
AMX AutoPatch product; service should be
done only by qualified personnel.
ä
If you see smoke or smell a strange odor
coming from your AMX AutoPatch
product, turn it off immediately and call
technical support.
ä
Turn off and unplug an enclosure before
adding or removing boards, unless
otherwise specified in that product’s
documentation.
ä
To avoid shock or potential ESD
(Electrostatic Discharge) damage to
equipment, make sure you are properly
grounded before touching components
inside an AMX AutoPatch product.
ä
For products with multiple power supplies
in each unit, make sure all power supplies
are turned on simultaneously.
ä
Use surge protectors and/or AC line
conditioners when powering AMX
AutoPatch products.
ä
Only use a fuse(s) with the correct fuse
rating in your enclosure.
ä
Make sure the power outlet is close to the
product and easily accessible.
ä
Make sure the product is on or attached to a
stable surface.
ä
Turn off equipment before linking pieces
together, unless otherwise specified in that
product’s documentation.
ä
For safety and signal integrity, use a
grounded external power source and a
grounded power connector.
IMPORTANT SAFETY INFORMATION AND INSTRUCTIONS
2 Precis Instruction Manual