Specifications

button; repeat with G and click OK. The
Assign Signals to Matrices dialog appears.
6. Select Matrix 1 under Matrix for R and click
the Assign Matrix button. Select Matrix 2
for G and click Assign Matrix. Click OK.
7. In the left pane, right click the newly created
Y/c virtual matrix and select Manage
Connector Groupings. The Manage Virtual
Matrix Groupings dialog appears.
8. Click the Group by Pattern button. The
Group Connectors by Pattern dialog
appears.
9. Click the Spanning and Sources Only radio
buttons in the Pattern Definition group.
10. Select 6 in the Number of Channels to
Create field and click the Assign Signal
button twice, accepting the default
connector numbers. This assigns 6 channels
to R for the Y signal and 6 to G for the c
channel. Click OK.
11. Repeat steps 8 through 10, clicking
Destinations Only instead of Sources Only
and selecting 4 channels instead of 6.
Click OK.
12. Click the Accept Assignments button.
MANAGING CONFIGURATION FILES
18 Precis Instruction Manual
Assign MatrixMatrix
Group
by Pattern
Accept
Assignments
Spanning
Sources Only
Destinations Only
Assign Signal Number of Channels to Create