Instruction manual

Enova DGX DXLink™ Twisted Pair Boards
82
Instruction Manual – Enova DGX 8/16/32 Digital Media Switchers
* Dolby Digital and DTS support up to 48 kHz, 5.1 channels.
** For more details and helpful cabling information, reference the white paper titled “Cabling for Success with
DXLink” available at www.amx.com or contact your AMX representative.
AMX reserves the right to modify its products and their specifications without notice.
Enova DGX DXLink Twisted Pair Board Specifications (continued)
Audio Format Support Dolby TrueHD, Dolby Digital*, DTS-HD Master Audio, DTS*,
2 CH L-PCM, 6 CH L-PCM, 8 CH L-PCM
Audio Resolution 16 bit to 24 bit
Audio Sample Rate 32 kHz, 44.1 kHz, 48 kHz, 96 kHz, 192 kHz
Local Audio Support Yes, insertion and/or extraction of 2 CH L-PCM selectable by channel
EDID Support • EDID provided by Enova DGX Digital Media Switcher to the
DXLink HDMI TX.
• EDID provided by Enova DGX Digital Media Switcher to the digital (HDMI)
input on the DXLink Multi-Format TX.
• EDID is user re-programmable
HDCP Support Yes, full matrix HDCP support (includes any input to any or all outputs, except
for SC Optical inputs and outputs)
• Key Management System
• AMX HDCP InstaGate Pro
®
Technology
• Key support up to 16 destinations per output, independent of source device
CEC Support None
ICSP, TCP/IP, USB, IR, and
Control Management
Control Distribution is managed by the Enova DGX Digital Media Switcher
on-board NetLinx Master and Ethernet Switch
DXLink Power DXLink Transmitters and Receivers can have power supplied over twisted pair
cable when connected to a DXLink Input or Output Board on the Enova DGX
Digital Media Switcher
Input Board Propagation
Delay
5 s
Output Board Propagation
Delay
5 s
Connectors 4 RJ-45 ports
Twisted Pair Cable Type Shielded Cat6, Cat6A, Cat7**
Twisted Pair Cable Length Up to 328 ft. (100 m)