Instruction manual

ESD Warning
1
Instruction Manual – Enova DGX 8/16/32 Digital Media Switchers
ESD Warning
To avoid ESD (Electrostatic Discharge) damage to sensitive components, make sure you are properly
grounded before touching any internal materials.
When working with any equipment manufactured with electronic devices, proper ESD grounding
procedures must be followed to make sure people, products, and tools are as free of static charges as
possible. Grounding straps, conductive smocks, and conductive work mats are specifically designed for
this purpose.
Anyone performing field maintenance on AMX Enova DGX Digital Media Switchers should use an
appropriate ESD field service kit complete with at least a dissipative work mat with a ground cord and a
UL listed adjustable wrist strap with another ground cord. These items should not be manufactured
locally, since they are generally composed of highly resistive conductive materials to safely drain static
charges, without increasing an electrocution risk in the event of an accident. ESD protective equipment
can be obtained from 3M™, Desco
®
, Richmond Technology
®
, Plastic Systems
®
, and other such
vendors.