Instruction manual

Installation and Setup
59
Instruction Manual – Enova DGX 8/16/32 Digital Media Switchers
Changing the BCS Tunnel Port Number
Important: Before you can change the BCS tunnel port number, you must log in to the device.
To change the BCS tunnel port number:
1.
In the WebConsole, select the desired Enova DGX Switcher from the Device drop-down menu in
the upper right.
2. From the IP Control tab’s drop-down menu, select Configuration.
3. In the BCS Tunnel Port Number field, enter the number.
4. Click Accept.
CPU Backup with Micro SD Memory Card
The system ships with a Micro SD memory card installed in the card slot on the CPU (page 60).
Important: We recommend keeping the card inserted when the system is running for normal
operation. Use only the card that was installed at the factory before shipment, unless directed by
technical support to install a different one.
The Micro SD memory card serves three purposes. It can be used for:
Backing up CPU settings (when replacing the CPU, duplicating a system, etc.)
Refreshing the revocation list (automatically authenticates the System Renewability Message
-SRM- list) whenever required
Updating the firmware*
These cards are considered “removable memory.” Firmware updates are periodic and necessary for bug
fixes and feature additions.
* Having a physical means to update the firmware is a plus, as a Micro SD memory card can be shipped
into strict security installations.