Instruction manual

Product Overview and General Specifications

Instruction Manual – Enova DGX 8/16/32 Digital Media Switchers

Enova DGX – NetLinx and Control Specifications

* Cascaded architecture actual throughput dependent on loading. Worst case per port throughput is 10 Mbps;

best case is 100 Mbps when used with a total of 32 DXLink TXs and 32 DXLink RXs for an Enova DGX 32,

16 DXLink TXs and 16 DXLink RXs for an Enova DGX 16, and 8 DXLink TXs and 8 DXLink RXs for an

Enova DGX 8.

For individual board information and specifications, see the specific board chapter in this manual.

HDMI Input and Output Boards – see page 63

DVI Input and Output Boards – see page 73

DXLink Twisted Pair Input and Output Boards – see page 79

SC Optical Input and Output Boards – see page 95

Audio Insert/Extract (expansion) Board – see page 101

AMX reserves the right to modify its products and their specifications without notice.

NetLinx and Control Specifications

Integrated Controller

LAN/ Ethernet Port NetLinx on-board Master is an NI-3100 Class Controller

• TCP/IP uplink port (LAN 10/100/1000)

• Supports up to 64-port un-managed 10/100 Ethernet Switch*

• Static IP or DHCP/DNS, SSL, Auto-negotiating, Half/Full Duplex, Auto

MDI/MDI-X Crossover

• TCP/IP, UDP/IP, CIP, SMTP, Built-in Web server

• Includes support for DXLink™ devices

• RJ-45 connector

Processor CPU 404 MIPS PowerPC

Memory • SDRAM 256 MB

• NVRAM 1 MB

•Flash 2 GB

Program Port (USB) USB Mini-AB connector (used for NetLinx Studio control)

Enclosure Control

Control Port (Serial) Bidirectional RS-232

• Baud rates of 9600 (default), 19200, 38400, 57600

• DB-9 connector

Control Port (USB) USB Mini-B connector