Instruction manual

Appendix H – DGX_SHELL Commands
220
Instruction Manual – Enova DGX 8/16/32 Digital Media Switchers
Basic DGX_SHELL Commands
The DGX_SHELL commands listed in the table below can be sent directly to the Enova DGX Switcher
via any standard emulation terminal once you enter the DGX_SHELL.
Note: BCPU is the acronym for Board CPU, and AIE is the acronym for Audio Insert/Extract (board).
At the DGX_SHELL prompt, type help or a question mark (?) and press Enter to access the Help
Menu, which displays all of the DGX_SHELL commands, including the basic ones described in the
table below.
Basic DGX_SHELL Commands
Command Description
?
help
Either of these commands displays all of the supported commands: those listed in this table,
plus advanced commands for troubleshooting (for technical support; see page 62).
help -a
help -v
The help -a command displays a list of all available commands
The help -v (verbose) command lists the commands and their descriptions.
Usage: help {-a}{-v}
Note: -a and -v can also be used with the ?.
help <cmd>
? <cmd>
Either of these commands displays detailed usage and options for the command specified.
Usage: help {<command>} or ? {<command>}
bcs This command is used to exit the DGX_SHELL and launch the standard terminal interface
where BCS commands can be entered. (No re-logging is required once you leave the DGX-
_SHELL session.)
Usage: bcs {<bcs_syntax_cmd>}
<bcs_syntax_cmd> = bcs syntax command string
• bcs with a command argument will execute and then return to the shell.
• bcs without a command argument will remain in the BCS Interpreter until exited with a
CTRL+C.