Instruction manual

Product Overview and General Specifications
14
Instruction Manual – Enova DGX 8/16/32 Digital Media Switchers
Input and Output Boards
A single enclosure can handle a combination of signals depending on the types of input and output boards.
Note: All boards in the table below are HDCP 1.4 compatible except for the SC Optical Boards.
* HDMI Boards require a cable adapter to support single-link DVI signals.
** For a DVI Board to support embedded audio on an HDMI signal, the EDID must be updated.
*** Supported analog video signals include RGBHV, RGBS, RGsB, and Y/Pb/Pr in and RGBHV out.
^ Signals supported by DXLink Twisted Pair Boards depend on the type of DXLink Transmitters and Receivers
used.
^^ Signals supported by SC Optical Boards depend of the type of DGX Fiber Transmitters and Receivers used.
Note: The DXLink Twisted Pair Boards also support embedded power, NetLinx control, and Ethernet.
All signals are automatically converted to the destination device’s format, with DXLink Twisted Pair
Transmitters and Receivers used for transport of signals with DXLink Boards and DGX Fiber Transmitters
and Receivers used in the conversion process for the DGX SC Optical Boards.
Enova DGX 8
Enova DGX 8 enclosures have 4 horizontal I/O board slots (2 slots each for input and output boards with
four connectors each), allowing for a maximum configuration of 8x8.
Input and Output Boards and Supported Signals
Signal Types HDMI w/HDCP HDMI w/out HDCP DVI-D w/HDCP DVI-D w/out HDCP Embedded Audio Embedded Audio from Audio Insert Extract Board Analog Video Discrete Digital Audio Analog Stereo Audio 3D Video Deep Color
Input: HDMI


* *


Output: HDMI


* *


Input: DVI
  
**


Output: DVI
  
**


Input and Output: DXLink^
    ***   
Input and Output: SC Optical^^
 *** 
Input boards Output boards
HDMI Board
Numbering plate
DXLink Board
DVI Board
FIG. 8 DGX DXLink, DVI, and HDMI Input and Output Boards
I/O Board Types