Manualshelf

Instruction manual

ManualsBrandsAMX Manualscomputer componentsAVS-ENOVADGX32-VI-DVI
11121314151617181920
Product Overview and General Specifications
13
Instruction Manual – Enova DGX 8/16/32 Digital Media Switchers
CPU/Control Board
The CPU/Control board is on the left rear of the enclosure, directly below the input connectors.
Each CPU includes the following port and slot options:
Two RJ-45 ports – for connecting autonomous devices (linking of enclosures is not allowed)
Control port* (DB-9, RS-232) – for attaching an external serial control device (see page 52)
Control port* (USB mini-B) – for attaching an external control device (see page 54)
SD card slot – ships with an installed Micro SD memory card for CPU backup (see page 59)
Program port (USB mini-AB) – for establishing a connection from the Integrated NetLinx Master to
the PC’s COM port (see page 40) and for initial setup of the system
LAN 100/1000 port (Ethernet RJ-45) – the connection from the integrated NetLinx Master to a LAN
(see page 41) for all runtime control, NetLinx programming, etc.
Each CPU includes four LED indicators:
System Status LED (to the left of the Control ports) – for system status
Status, Output, and Input LEDs (above Program connector) – indicate system communication status
and when data is sent and received (for modes and blink patterns, see page 40)
* The two Control ports provide direct control of matrix switcher processing (they do not work on the same layer
of control as the integrated Master, which uses the LAN 100/1000 and Program ports).
Power Supply Units
Each of the power supply units on the rear of the enclosure (FIG. 7) has a power receptacle that will
accept all major international standard power sources. (US power cords are included with all shipments
unless ordered otherwise.) Maximum power specifications are provided on the power supply receptacles.
For information on applying power, see page 35.
The power supply units have two LED indicators:
AC: Green LED – power is good
DC: The DC indicator uses a tri-color LED
Green – power is good
Amber – temperature is above normal
Red – power supply is in a fault state
FIG. 6 CPU/Control board
FIG. 7 Power supply receptacles for Enova DGX 8/16 (left) and Enova DGX 32 (right)
Control (USB mini-B) port
RJ-45 ports
Control (DB-9, RS-232 serial) portSystem Status indicator
LAN 100/1000 port
Program (USB mini-AB) port
and LED indicators
SD card slot
MAC address