Instruction manual

NetLinx® Integrated Control
134
Instruction Manual – Enova DGX 8/16/32 Digital Media Switchers
Setting a Static IP Address
The current IP address is displayed on the Network Settings page.
Note: When the TCP/IP connection is made, the DHCP server on the network automatically assigns
an IP address. If you power down and power back up, the DHCP server will reassign the
IP address, which may or may not be the same address it assigned previously. Setting a static IP
address prevents the possibility of the IP address changing at power up.
To enter a static IP address:
1.
From the Devices drop-down list in the upper right-hand corner, select NI Master.
The Network Settings page opens.
2. If Specify IP Address is not selected under IP Address, click to enable.
3. Enter the static IP address in the IP Address fields.
4. Click Accept.
5. Click Reboot.
Important: Any time you click “Reboot” from any page in the WebConsole, the server reboots. The
reboot updates information between the Enova DGX Master and the server. The Enova DGX
Switcher itself does not
reboot.
FIG. 71 Network Settings page with static IP Address
Click to specify IP Address
Enter Static IP Address