Instruction manual

Product Overview and General Specifications
8
Instruction Manual – Enova DGX 8/16/32 Digital Media Switchers
Epica DGX SC Optical Boards** (page 95)
** Epica DGX SC Optical Boards work in Enova DGX enclosures and must be used in conjunction with
DGX Fiber Transmitters and Receivers. For model numbers of compatible modules, see page 96. For
system setup information, see page 97.
Enova DGX Expansion Boards
Enova DGX Switchers currently support the Audio Insert/Extract Board. This board can be installed in
either or both of the expansion slots. Audio Insert/Extract Boards will not fit in a standard input or output
board slot.
Enova DGX Audio Insert/Extract Board (page 101)
Product Notes
The Enova DGX Digital Media Switcher includes an integrated NetLinx Central Control Processor,
supports InstaGate Pro
®
, DXLink™ Technology, and SmartScale
®
on every output, and manages and
distributes analog and digital audio and video including HDMI/HDCP, control, and Ethernet.
The Enova DGX Switcher is available as a custom system, which means it can be ordered in input to
output configuration sizes that fit your installation and contain an assortment of input, output, and
expansion boards in a single enclosure.
Note: Because Enova DGX Switchers are available as custom systems, the illustrations in this
manual may differ from the model(s) you purchased.
Features of the Enova DGX Digital Media Switcher
HDMI, DVI, DXLink™, and Audio
True HDMI switching, allowing any input to be switched to any or all outputs (including
SC Optical).
Incorporates HDMI
®
technology – HDMI, DVI, and DXLink™ Twisted Pair Boards.
HDCP 1.4 compatible (all boards except SC Optical Boards which cannot pass HDCP).
Supports uncompressed video resolutions up to 1920x1200 @ 60 Hz, including HDTV up
to 1080p.
DGX Technology provides a common signal transport and matrix switching layer that
transcodes between analog and digital signals.
HDMI and DVI Output Boards, as well as compatible DGX Fiber Receivers, feature
SmartScale
®
Technology which automatically responds to the display’s declared EDID
information and scales the video to the best resolution and video parameters for that display
without manual setup.
Pre-loaded with the most common EDID settings on each switcher input connector (other than
fiber connectors) to emulate display response when queried, which ensures that transmission of
the video from the source device is working.
Type FG # Model
SC Optical Input FG1056-500 AVS-EPDGX32-OI-SC
SC Optical Output FG1056-510 AVS-EPDGX32-OO-SC
Type FG # Model
Audio Insert/Extract FG1058-700 AVS-ENOVADGX32-AUD-INS-EXT