Instruction manual

Appendix A – EDID Programmer
107
Epica DGX 32 Instruction Manual
11. Click the Open button to select the .edid file to be written to the DVI input connector.
12. Click the Write button to write the EDID information to the DVI input connector.
13. If applicable – Repeat any of the steps that are necessary for any additional DVI input connectors.
14. Disconnect the DVI video cable from the PC and from the Epica DGX 32 Input Board.
15. Disconnect the serial cable from the PC and from the Epica DGX 32 enclosure.