Instruction manual

Overview and Specifications

DGX Transmitters & Receivers Instruction Manual

Compatibility Note: These modules are compatible only with each other (either TX to either RX)

and with other AMX AutoPatch DGX Signal Management products. DGX Fiber modules are not

compatible with third-party optical distribution amplifiers or multimode to single-mode converters.

Analog Video Specifications

Input Signal Types RGBHV, RGBS, RGsB, Y/Pb/Pr

Auto-Adjust Input Yes

DDC/EDID Support EDID provided by DGX TX

EDID is user re-programmable

RGB Input Signal Level Range 0 to 700 mVpp (0 to 750 mVpp max.)

RGB Input Impedance 75 ohm

HV Sync Input Signal Level Range 0 to +5 V

HV Sync Input Impedance 510 ohm

HV Sync Input Trigger Voltage +1.75 V

Y/Pb/Pr Input Signal Level Range 1.0 Vpp for Y

700 mVpp for Pb Pr

Y/Pb/Pr Input Impedance 75 ohm

Input Connector HD-15 (RGBHV and Y/Pb/Pr)

RGB Local Out Signal Level Range 0 to 700 mVpp (0 to 750 mVpp max.)

RGB Local Out Impedance 75 ohm

HV Sync Local Out Signal Level Range 0 to +5 V

HV Sync Local Out Impedance 50 ohm

Y/Pb/Pr Local Out Signal Level Range 1.0 Vpp for Y

700 mVpp for Pb Pr

Y/Pb/Pr Local Out Impedance 75 ohm

Local Output Connector HD-15 (RGBHV and Y/Pb/Pr)

Output Signal Type RGBHV

Output Scaling SmartScale™, Presets, Manual Configuration

RGB Output Signal Level Range 0 to 700 mVpp (0 to 750 mVpp max.)

RGB Output Impedance 75 ohm

HV Sync Output Signal Level Range 0 to +5 V

HV Sync Output Impedance 50 ohm

Output Connector HD-15 (RGBHV)