Instruction manual

Installation and Setup
40
Instruction Manual – DXLink™ Twisted Pair Transmitters/Receiver
Mounting Options for Modules (Rack Trays and Mounting Brackets)
Caution: To prevent overheating, avoid placing high heat producing equipment directly above or
below the modules. We recommend allowing plenty of clearance above the vent holes on top of the
modules. Do not place anything directly on top of the modules that would restrict airflow through the
vent holes on top.
The HDMI TX, Multi-Format TX, and HDMI RX are classified as V Style modules, which have
optional V Style mounting hardware. These versatile mounting options include rack trays and mounting
brackets for desktops, under desks, on walls, and on poles. For details on V Style Mounting Kit options,
see www.amx.com.
Important: When mounting under a surface, the module should be lowered in the slots to provide an
airflow gap for the vent holes.
Mounting Options for Wallplates
The holes in the Wallplate mounting bracket are designed to accommodate a variety of double-gang back
boxes using two or four screws. Two types of screws are provided: standard and metric. Be sure to orient
the mounting bracket as shown in FIG. 19.
FIG. 18 V Style mounting hardware
FIG. 19 Wallplate mounting bracket used with variety of double-gang back boxes
V Style Single Module
Surface Mount brackets
V Style Module Tray
V Style Single Module Pole Mount
UK surface mount on exterior wall
UK flush mount inside wall
US flush mount inside wall
European flush mount inside wall
Or