Instruction manual

Product Overview and Specifications
23
Instruction Manual – DXLink™ Twisted Pair Transmitters/Receiver
* Cable runs with a minimum specification of ANSI/TIE/EIA 568A-5 and ratings of 250 MHz or better may be
used with DXLink equipment. However, cable run topology and environmental influences can affect the overall
successful distance capabilities of these runs. For successful deployments up to 100 meters without
consideration to outside variables, AMX recommends the use of shielded category cable (STP) or Cat6A
(or better) versions of unshielded or shielded twisted pair (UTP/STP) for DXLink runs. For more details and
helpful cabling information, please contact your AMX representative for a copy of the white paper titled
“Cabling for Success with DXLink.”
AMX reserves the right to modify its products and their specifications without notice.
General Specifications (continued)
Parameter Value
Wallplate TX - Dimensions
Depth
Width
Height
1.31 in. (3.33 cm)
5.98 in. (15.20 cm)
4.69 in. (11.90 cm)
Wallplate TX - Weight Approximately 1.4 lb. (0.64 kg)
Wallplate TX - Shipping Weight Approximately 2.5 lb. (1.13 kg)
Modules - Mounting Options Compatible with all V Style versatile mounting options including rack,
surface, or pole (for V Style Mounting kits, see www.amx.com)
Wallplate TX - Mounting Options Wallplate mounts onto standard double-gang US, UK, or EU back
boxes
MTBF 381,000 hours
Transport Layer Throughput 10.2 Gbps
Twisted Pair Cable Type
Cat5e, Cat6/6e, Cat6A, Cat7 of UTP, SF/UTP, S/FTP, and F/UTP
varieties
Twisted Pair Cable Length* Up to 328 ft. (100 m)
Important: DXLink twisted pair cable runs for DXLink equipment
should only be run within a common building.
Airflow Convection (openings on top of case)
Transmitter and Receiver
Inter-compatibility
• DXLink HDMI TX can connect directly to DXLink HDMI RX.
• DXLink Multi-Format TX can connect directly to DXLink HDMI RX.
Note: Multi-Format Wallplate cannot connect directly to HDMI RX.
Spec - Twisted Pair
Cable Length