Instruction manual

Product Overview and Specifications
7
Instruction Manual – DXLink™ Twisted Pair Transmitters/Receiver
Product Overview and Specifications
Applicability Notice
The information in this manual applies to the DXLink HDMI Transmitter Module, the DXLink
Multi-Format Transmitter Module, the DXLink Multi-Format Wallplate Transmitter, and the DXLink
HDMI Receiver Module listed in the table below. In this manual, these products will be referred to as the
HDMI TX, Multi-Format TX, Wallplate TX, and the HDMI RX. When referring to all three of the
transmitter units, the term Transmitters will be used.
DXLink™ Twisted Pair Transmitters and Receiver
Compatibility Note: The Transmitters and the Receiver listed above are compatible with a number
of other DXLink products (see the section “Product Compatibility Tables” on page 8) and the HDMI
TX and Multi-Format TX are compatible with the Receiver (the Wallplate TX cannot be connected
directly to an HDMI RX).
Product Notes
The Transmitters and Receiver are designed for transmission of an HDMI signal over twisted pair cable
(or a DVI signal via a DVI-to-HDMI cable adapter) up to 328 feet (100 m). Functionality is briefly
described below.
HDMI TX
– The HDMI TX receives an HDMI signal and an audio signal from a source device. The
audio can be either digital audio embedded with the HDMI, digital audio over S/PDIF, or analog stereo
audio. Both the video and audio are transported over twisted pair cable to an Enova DGX 16/32 or
applicable Enova DVX Solution (or to an HDMI RX). The 232 port (RS-232) on the HDMI TX supports
bidirectional serial data via the twisted pair cable to/from the 232 port on an HDMI RX. The HDMI TX
also has IR ports.
Multi-Format TX – The Multi-Format TX receives an HDMI signal or analog video signal (composite,
Y/c, Y/Pb/Pr, RGB, RGBS, or RGBHV) and an audio signal from a source device. The audio can
be either digital audio embedded with the HDMI signal, digital audio over S/PDIF, or analog stereo
audio. Both the video and audio are transported over twisted pair cable to an Enova DGX 16/32 or
applicable Enova DVX Solution (to an HDMI RX). The 232 port (RS-232) on the Multi-Format TX
supports bidirectional serial data via the twisted pair cable to/from the 232 port on an HDMI RX. The
Multi-Format TX also has IR ports.
Wallplate TX – The Wallplate TX receives an HDMI signal or analog video signal (composite, Y/c,
Y/Pb/Pr, RGB, RGBS, or RGBHV) and an audio signal from a source device. The audio can be either
digital audio embedded with the HDMI signal or analog stereo audio. Both the video and audio are
transported over twisted pair cable to an Enova DGX 16/32 or applicable Enova DVX Solution.
FG # Model Model Number, Description
FG1010-300 HDMI-TX AVB-TX-HDMI-DXLINK, DXLINK HDMI HDCP TX
FG1010-310 Multi-Format TX AVB-TX-MULTI-DXLINK, DXLINK MULTIFORMAT HDCP TX
FG1010-320-BL
FG1010-320-WH
Multi-Format
Wallplate TX
AVB-WP-TX-MULTI-DXLINK, DXLINK MUTIFORMAT
WALLPLATE TX (BLACK or WHITE)
FG1010-500 HDMI-RX AVB-RX-DXLINK-HDMI, DXLINK HDMI HDCP RX W SCALER