Specifications

Page 8 of 36
OSD Functions
Image
Brightness
Increase/decrease brightness level.
Press – or + (- + ) Total : 100 steps
Contrast
Increase/decrease contrast level.
Press – or + (- + ) Total : 100 steps
Sharpness
Increase/decrease sharpness level.
Press – or + (- + ) Total : 8 steps
Color
Auto : Auto RGB Calibration ([See appendix V] in details)
(Function in ARGB mode only)
Color temp4 (Adjust the warmness of the image displayed. The higher temperature the
coolest image looks like. The lower temperature the warmest image looks like.)
4200k
5000k
6500k
7500k
9300k
User 4
R Press – or + (- + ) Total : 100 steps
G Press – or + (- + ) Total : 100 steps
B Press – or + (- + ) Total : 100 steps
Reset
Gamma (0.4/0.6/1.0/1.6/2.2)
Display (Function in ARGB mode only)
Auto Adjust
Auto adjust the positions, phase, frequency
Phase
Fine tune the data sampling position (adjust image quality)
Press – or + (- + ) Total : 100 steps
Clock
Adjust the image horizontal size
Press – or + (- + ) Total : 100 steps
Display Position
Adjust image position
Backlight**4
Invert
B/L Invert : Invert for the backlight brightness
Control
D/A / PWM : Selection for voltage level dimming control / PWM dimming control
Frequency
Backlight frequency 100 ~ 440Hz in a step of 20
B/L
Backlight brightness adjustment
Sound (Function when HDMI and Display Port connected and selected)
Volume
Increase/decrease volume level, total: 100 steps
Press – or + (- + ) Total : 100 steps
Mute
Mute
Output
Select audio output port
Speakers : via CN1 & J1 connector
SPDIF : via CN11 connector
System4
Input : Select the input video signal
Display Port
VGA
DVI/HDMI
Autoscan : Enable the Auto source seek function
Timer : OSD Timeout in seconds
Press – or + (- + ) From ON, 5 to 60 (Total : 13
steps, ON standard for Always ON)