Specifications

Page 14 of 36
Pos #5 Pos #6 Pos #7 Description
OFF OFF OFF WUXGA
ON OFF OFF UXGA
OFF ON OFF SXGA
ON ON OFF WXGA
OFF OFF ON XGA
ON OFF ON SVGA
OFF ON ON VGA / WVGA
ON ON ON Others
SW1 Pos 8 = Reserved.
DIP switch selection – SW2
Pos. # Function Description
1 Panel pixel format OFF : Double Pixel
ON : Single Pixel
2 LVDS data mapping select ON : Mapping A (LVDS panel)
OFF : Mapping B (LVDS panel)
Please adjust to get the correct picture. See as Appendix IV for details of
mapping A and B.
3 Reserved Reserved
4 Operating mode selection OFF : General application
ON : Work with RM-DN5 (firmware version E1.12.10a) from HDMI port
#
The most current list can be found the controller solution generator at http://www.digitalview.com/controllers/csg.php
Remark :
# Assign SW2 position 4 to ON for connection to RM-DN5 (Firmware version : E1.12.10a) from HDMI port with the following
changes :
- Add “Loading…” message on screen while startup and stay until the valid signal.
- Changed the default Auto Source Seek to Off
- Changed the IR key from "Display" key to "OSD Next" key for menu function
- Extend longer delay time approx. (4 secs) to detect signal for "No Signal" state
- Only HDMI input and disabled all other "Source" selections in OSD, IR hotkeys & RS-232 for RM-DN5 mode