User's Manual

Using The Touch Panel Pages
15
ALD-H48 Lighting Controller
The sample touch panel only includes support for 2 groups but the system supports 48 groups.
There is a limited amount of editing functionality available on the test pages. While it is not
possible to delete a group from this page once the group has been established, you can overwrite an
existing group.
 To Group 1 - Open control of dimmers associated with Group 1.
 To Group 2 - Open control of dimmers associated with Group 2.
 Reset - Clears selected dimmers from the group and returns it to the last saved state.
 Level Up/Down - Ramps the selected group up and down.
Creating A Group
1. Push either button To Group 1 or To Group 2, depending on which one you want to set.
2. Push the address buttons for all of the dimmers you want included in the group.
3. Push the To Group... button previously selected in Step 1. The page then gives you a
confirmation.
While you are selecting dimmers for a group you can deselect all addresses by pushing the Reset
button, this will not remove dimmers already established within that group.
FIG. 11 Groups Page
Setting a group overwrites any previous group settings.