User's Manual

Using The Web Interface
10
ALD-H48 Lighting Controller
Establishing And Modifying Groups
For the purpose of controlling several dimmers at one time you can place them into groups. The
groups can then be manipulated collectively.
1. Click the Groups button to list all available group numbers.
2. Click the Modify button for the Group you would like to set. This opens the Modify Group
page. Shown below.
In the column on the left is a list of all dimmers available for adding to the group. The column on
the right is a list of all dimmers currently included in the selected group.
3. Select an available dimmer on the left and click the ">" button in the center to move it to the
included list on the right. You can move all dimmers at one time by clicking on the ">>"
button, remove a dimmer from the scene list by clicking the "<" button and remove all dimmers
by clicking "<<".
4. Click Save to set your group.
FIG. 7 Modify Group