User's Manual

Using The Web Interface
7
ALD-H48 Lighting Controller
Controlling Dimmers via The Web Page
Once a dimmer has been addressed, you have access to a few basic level controls from the master’s
web page.
1. Click the button Dimmer Control to open the Dimmer Control page. (FIG. 4)
Listed in the column on the left are all dimmer addresses available for control. On the right is a
percentage bargraph representation of the current state of the selected dimmer.
2. To change the state of a dimmer, select a dimmer address in the column on the left.
 Click on 100% to ramp the dimmer completely on and 0% to ramp the dimmer off.
 Click within the bargraph area on the right to shift the dimmer state up and down to a
desired percentage.
FIG. 4 Dimmer Control