User's Manual

Getting Started

ALD-H48 Lighting Controller

You can also make any additional edits to the ALD-H48 project or elect to send the file to the

NetLinx Master as is.

Step 4: Transferring The ALD-H48 Project to A NetLinx

Master

NetLinx Studio can transfer the ALD-H48 project file to any connected NetLinx Master with

firmware version 3.XX or higher.

1. Select Tools > File Transfer to open the File Transfer dialog.

2. If the Workspace file is not already listed in the window click Quick Load to open the

corresponding dialog.

3. In the drop down list select the ALD-H48 Workspace.

4. Click Select All.

5. Click OK.

6. Make sure there is a check in the box next to the ALD-H48 workspace within the File Transfer

dialog and click Send.

There is a "simple" version of the ALD-H48 files. These files are intended for

demonstration purposes only.