Specifications

©2013 DJI Innovations. All Rights Reserved.
Appendix
Specifications
General
Built-In Functions
(1) Three Modes of Autopilot
(2) Enhanced Fail Safe
(3)Low Voltage Protection
(4) S-Bus Receiver Support
(5)PPM Receiver Support
(6) 2-axle Gimbal Support
Peripheral
Supported Multi-rotor
 Quad-rotor I4, X4;
 Hexa-rotor I 6, X6, IY6, Y6.
 Octo- rotor I8, V8, X8
Supported ESC output
400Hz refresh frequency.
Recommended Transmitter
PCM or 2.4GHz with a minimum 4 channels.
Assistant Software System Requirement
Windows XP SP3; Windows 7; Windows 8
Electrical & Mechanical
Working Voltage Range
 MC: 4.8V ~ 5.5 V
 VU Input: 7.4V ~ 26.0 V (recommend 2S ~ 6S LiPo)
Output(V-SEN port red wire): 3A@5V
Output(V-SEN port red wire)burst current:7.5A
Power Consumption
 MAX: 3.15W(0.25A@12.6V)
 Normal: 1.638W(0.13A@12.6V)
Operating Temperature
-10°C ~ 50°C (14F ~122F)
Weight
 MC: 27g
 GPS/Compass: 27g
 PMU: 28g
 LED: 13g
Dimensions
 MC: 45.5mm × 32.5mm × 18.5mm
 GPS/Compass: 46mm (diameter) x 10mm
 PMU：39.5mm × 27.5mm × 10.0mm
 LED：25mm × 25mm × 7.0mm
Flight Performance (can be effected by mechanical performance and payloads)
Hovering Accuracy (GPS Mode)
 Vertical: ± 0.8m
 Horizontal: ± 2.5m
Max Yaw Angular Velocity
200°/s
Max Tilt Angle
35°
Max Ascent / Descent Speed
±Ascent : 6m/s, Descent: 4.5 m/s