Instruction manual

ESD Warning
6
Instruction Manual – DXLink™ Twisted Pair Transmitters/Receiver
ESD Warning
To avoid ESD (Electrostatic Discharge) damage to sensitive components, make sure you are properly grounded
before touching any internal materials.
When working with any equipment manufactured with electronic devices, proper ESD grounding procedures must
be followed to make sure people, products, and tools are as free of static charges as possible. Grounding straps,
conductive smocks, and conductive work mats are specifically designed for this purpose.
Anyone performing field maintenance on AMX DXLink equipment should use an appropriate ESD field service
kit complete with at least a dissipative work mat with a ground cord and a UL listed adjustable wrist strap with
another ground cord. These items should not be manufactured locally, since they are generally composed of highly
resistive conductive materials to safely drain static charges, without increasing an electrocution risk in the event of
an accident. ESD protective equipment can be obtained from 3M™, Desco
®
, Richmond Technology
®
, Plastic
Systems
®
, and other such vendors.