Instruction manual

Product Overview and Specifications
30
Instruction Manual – DXLink™ Twisted Pair Transmitters/Receiver
DXLink Transmitters and Receiver Specifications
The specifications apply to the following Transmitters and Receiver:
FG1010-310 – DX-TX
FG1010-300 – DXLink HDMI TX Module (discontinued)
FG1010-320-BL – DX-TX-WP, Black*
FG1010-320-WH – DX-TX-WP, White*
FG1010-325-BL – DX-TX-DWP (US), Black*
FG1010-325-WH – DX-TX-DWP (US), White*
FG1010-500 – DX-RX
* A limited set of specifications apply, as the Wallplate TX and Decor Wallplate TX have a limited set of features
when compared to the Multi-Format TX and HDMI TX.
AMX reserves the right to modify its products and their specifications without notice.
General Specifications
Parameter Value
Approvals CE, UL, cUL, FCC Class A, RoHS, WEEE
AC Power (Modules Only) 100 to 240 VAC single phase, 50 Hz to 60 HZ
0.6 A @ 115 VAC max.
DXLink Power
DXLink Twisted Pair Transmitters (DX-TX, DX-TX-DWP, and DX-TX-WP):
Power can also be supplied by a DXLink Power sourcing device such as an
Enova DGX 8/16/32/64 Digital Media Switcher or compatible Enova DVX
All-In-One Presentation Switcher (DVX-3155HD, 3156HD, or 2155HD),
PS-POE-AT-TC High Power PoE Injector (FG423-84) or PDXL-2 Power over
DXLink Controller (FG1090-170). AMX does not support the use of any other
power supplies or PoE injectors as these may potentially damage the
DXLink equipment. To use PS-POE-AT-TC as a power source the DX-TX
Transmitter requires firmware v1.2.40or above, and DX-TX-DWP and
DX-TX-WP Transmitter Wallplates require firmware v1.2.40 or above.
DXLink Twisted Pair Receiver (DX-RX):
Power can also be supplied by a DXLink Power sourcing device such as an
Enova DGX 8/16/32/64 Digital Media Switcher or compatible Enova DVX
All-In-One Presentation Switcher (DVX-2150HD, or 2155HD),
PS-POE-AT-TC High Power PoE Injector (FG423-84), PDXL-2 Power over
DXLink Controller (FG1090-170), or SDX-510M-DX Solecis 5x1
Multi-Format Digital Switcher (FG1010-315). AMX does not support the use
of any other power supplies or PoE injectors as these may potentially
damage the DXLink equipment. To use PS-POE-AT-TC as a power source
the DX-RX Receiver requires firmware v1.0.80 or above.
Power Budget for Transmitters and Receiver:
When installed in conjunction with the Enova DGX Digital Media Switcher,
use the Enova DGX Configuration Tool located at www.amx.com/enova to
determine the power requirements of the configuration and whether any of
the DXLink Transmitters or Receivers should be powered with the local
power supplies or the supported Power over DXLink injector. The
configuration tool contains instructions on how to determine power
requirements.
Power Consumption,
Local 12 V Supplied (max.)
Multi-Format TX 10 W (13.5 V), HDMI TX 9 W, HDMI RX 18 W
Power Consumption,
Enova DXLink Power Supplied (max.)
Multi-Format TX 10 W, HDMI TX 9 W, Wallplate TX 7 W,
Decor Wallplate TX 7 W, HDMI RX 15 W
Thermal Dissipation,
Local 12 V Supplied (max.)
Multi-Format TX 34 BTU/hr. (13.5 V), HDMI TX 31 BTU/hr.,
HDMI RX 61 BTU/hr.