Instruction manual
Appendix H – EDID Programming
140
Instruction Manual – DXLink™ Twisted Pair Transmitters/Receiver
To write VGA EDID data to a DXLink Transmitter:
1.
Download the VGA EDID set provided by technical support.
2. On the PC, open the DGX Configuration Software and select the EDID Programmer tab.
3. Under Inputs/Outputs on the left, expand the device tree, and select the HD-15 input.
4. From the File menu, select Open File to select the VGA .edid file that was downloaded in Step 1.
5. Click Write to write the VGA EDID information to the HD-15 input.
Tip: You can confirm that the new VGA EDID data was written to the HD-15 input by selecting the HD-15
input and clicking on the Read button or by using the SEND_COMMAND
?VIDIN_EDID, which will return:
VIDIN_EDID-USER EDID 1.
Important: You can revert to the factory default EDID for the HD-15 input by using the SEND_COMMAND
VIDIN_EDID-ALL RESOLUTIONS (i.e., AMX_0500_003).
Convert to Digital - does not apply
EDID Information (read-only)
EDID Type – will be analog only
Write – writes EDID to the Transmitter
(digital does not apply to HD-15 input)
Device tree with HD-15 input
Messages