MSDS

6110FR
Du Pont
Material Safety Data Sheet
Page 4
Printed on 10/13/2010
----------------------------------------------------------------------
Safeguards (Personnel)
NOTE: Review FIRE FIGHTING MEASURES and HANDLING (PERSONNEL)
sections before proceeding with clean-up. Use appropriate
PERSONAL PROTECTIVE EQUIPMENT during clean-up.
Accidental Release Measures
Ventilate area, especially low or enclosed places where
heavy vapors might collect. Extinguish open flames. Use
self-contained breathing apparatus (SCBA) for large spills
or releases. Eliminate electrical sources.
----------------------------------------------------------------------
HANDLING AND STORAGE
----------------------------------------------------------------------
Handling (Personnel)
Avoid breathing vapor. Avoid liquid contact with eyes and
skin. Use with sufficient ventilation to keep employee
exposure below recommended limits. See Fire and Explosion
Data section.
Storage
Clean, dry area. Do not heat above 52 deg C (125 deg F).
----------------------------------------------------------------------
EXPOSURE CONTROLS/PERSONAL PROTECTION
----------------------------------------------------------------------
Engineering Controls
Avoid breathing vapors. Avoid contact with skin or eyes.
Use with sufficient ventilation to keep employee exposure
below the recommended exposure limit. Local exhaust should
be used if large amounts are released. Mechanical
ventilation should be used in low or enclosed places.
Personal Protective Equipment
Impervious gloves should be used to avoid prolonged or
repeated exposure. Chemical splash goggles should be
available for use as needed to prevent eye contact. Under
normal manufacturing conditions, no respiratory protection
is required when using this product provided exposure is
maintained at or below occupational limits. Self-contained
breathing apparatus (SCBA) is required if a large release
occurs.
Exposure Guidelines
Applicable Exposure Limits
PENTAFLUOROETHANE (HFC-125)