Operation Manual

Connect device with your mobile phone
First read and observe the introductory information and safety warn-
ings on page 38.
A phone is paired with the device
After switching on the unit, the system automatically attempts to connect to the
last connected mobile phone .
While the connection is being created, the message in the device screen may vary
depending on the phone type ... Would you like to connect? And a menu will ap-
pear with the following function keys.
›
Connect - Pairing confirmation
›
Cancel - Cancel the pairing process
If the connection cannot be established the system will attempt to connect to
other previously connected phones one by one.
If there is still no connection, start a phone search.
There is no phone paired with the device
After switching on the ignition, the message Please search for and connect a mo-
bile telephone. appears in the device screen. A menu is also displayed with the
following function keys.
›

Find telephone - Search for available phones with activated Bluetooth
®
Function and visibility
›

- Open the settings menu » page 37, Settings
Press Results function key after completion of the search. It will display a list of
discovered phones (the function key is also available during the search).
Select the phone you want from the list.
If the search fails, check that the conditions for successful pairing are
met » page 38, Conditions for successful pairing and repeat the whole process.
Pairing confirmation
Depending on the phone's Bluetooth
®
version, pairing is confirmed in one of the
following ways.

›
In the device and the phone within 30 seconds, confirm the 6-digit PIN code on
the device screen and the phone display
1)
.
›
If necessary select in the phone the option of automatically connecting the
phone to the device.
or
›
confirm the connection request in the telephone.
›
Enter the 4-digit PIN code shown in the unit display into the mobile phone with-
in 30 seconds
›
If necessary select in the phone the option of automatically connecting the
phone to the device.
Connection
After successful connection, the device will display the message ... user is con-
nected., And the main Phone menu » Fig. 22 on page 36is then displayed.
Note
If the mobile phone supports the Bluetooth
®
profile A2DP or AVRCP, your mobile
phone might prompt you to pair the phone as a Bluetooth
®
player.

Pairing mobile phone with device
First read and observe the introductory information and safety warn-
ings on page 38.
When pairing from the phone, follow the instructions in the owner's manual of
the phone.
›
Have the phone search for available Bluetooth
®
devices.
›
Select the device in the list of Bluetooth
®
devices
2)
.
While connecting, the message ... Would you like to connect?, and the following
function keys are displayed on the device screen.
Cancel - Cancel the pairing process
Connect - Confirm the coupling process


1)
For devices with Bluetooth
®
v2.1 and later, the phone's quick coupling procedure (SSP Secure Simple
Pairing) is used for pairing. This coupling method requires no PIN entered by the user.
2)
The name of the device will be found in the Bluetooth
®
settings» page 21.
39
Communication