Operation Manual
Button/
wheel » Fig. 9
Action Function
1
Turn downwards Reduce volume of navigation announcements
2
Press briefly Repeat or clarify the last navigation announcement or confirm a menu item in the list of recent destinations
2
Turn upwards
Show the option to stop navigation or display the list of recent destinations
2
Turn downwards
3
Press briefly Return to a previous level on menu
3
Press and hold button Return to Main Menu
Voice control
Introduction
This chapter contains information on the following subjects:
Function requirements
14
Switching on/off 15
Help for voice control 15
Operation 15
Non-recognition of a voice command 16
Option to correct a voice command input 16
Stop/restore voice command input 16
Not in the voice commands included in the help section 16
First and foremost, pay attention to the safety instructions » page 4, Important
notes.
Some equipment functions can be operated using voice commands. This acceler-
ates the use of the device and increases comfort while driving.
Voice control can be used in the Radio, Media, Phone and Navigation menus.
The voice control system can be operated either by the driver or by the front pas-
senger.
WARNING
■
Please pay attention to the traffic first and foremost. As the driver you are
fully responsible for road safety. Only use the system in a way that leaves you
in full control of your vehicle in every traffic situation – there is the risk of an
accident.
■
Do not use the voice control system under stress or in an emergency. Your
voice commands may not be recognized in such situations. In such circum-
stances it may not be possible to establish a telephone connection or the con-
nection may take too much time to complete. The emergency number should
be dialled manually.
Function requirements
First read and observe the introductory information and safety warn-
ings on page 14.
Function requirements for voice control.
The ignition is switched on.
The unit is switched on.
No phone call is in progress.
The parking aid is not active.
Requirements for optimum voice command recognition.
›
Only give voice commands when the symbol.
is displayed on the device
screen or in the information display.
›
Speak with a normal tone of voice without intonation and excessive pauses.
›
Avoid a bad pronunciation.
14
Familiarization with the unit