Operation Manual

Buttons and wheels in the Radio/Media menu
Button/
wheel » Fig. 7
Action
Function
Radio Media
1
Press briefly Change source (change frequency bands and connected sources)
1
Press and hold button
Switch between the Radio and Media menus and open the last context status (e.g. the last radio station or
track to be played)
2
Press briefly Switch off/on tone
a)
Start/stop playback
2
Turn upwards Increase volume of the current source
b)
2
Turn downwards Lower volume of the current source
b)
3
Press briefly
Go to the next saved radio station in the station list
or go to the station stored in the preset list
c)
Interrupt traffic report
Skip to next track
d)
3
Press and hold button Stop traffic report Fast forward
d)
4
Press briefly
Go to the previous stored radio station in the station
list
or go to the station stored in the preset list
Interrupt traffic report
Go to the previous track when pressed within 5 s from
the change of track,
and to the beginning of the track when pressed 5 s af-
ter track change
d)
4
Press and hold button Stop traffic report Fast rewind
5
Press briefly Stop traffic report No function
5
Turn upwards
Display list of available stations
Scroll upwards
Switch to previous track
d)
5
Turn downwards
Display list of available stations
Scroll downwards
Skip to next track
d)
6
Press briefly Call up the main menu
a)
The sound is turned on again by pressing dial
2
or turning dial
2
. Playback of the navigation announcements is not turned off.
b)
The volume of the audible messages played by the system in the unit voice mode dialogues is modified.
c)
Context-dependent selection.
d)
Does not apply for AUX.
Note
Vehicles with the CANTON
®
sound system equipment are fitted with a loudspeak-
er set including a mid-range speaker and bass speaker.

11
Unit operation