User's Manual

AmTRAN
WN4608R Specification Page 12/12 2011/12/12
RF exposure warning
This equipment must be installed and operated in accordance with provided
instructions and the antenna(s) used for this transmitter must be installed to
provide a separation distance of at least 20 cm from all persons and must not
be co-located or operating in conjunction with any other antenna or transmitter.
End-users and installers must be provide with antenna installation instructions
and transmitter operating conditions for satisfying RF exposure compliance.
FCC NOTICE: To comply with FCC part 15 rules in the United States, the system
must be professionally installed to ensure compliance with the Part 15 certification. It
is the responsibility of the operator and professional installer to ensure that only
certified systems are deployed in the United States. The use of the system in any
other combination (such as co-located antennas transmitting the same information) is
expressly forbidden.
Only the antennas listed below are allowed to be used with the EUT output power.
Antenna List
No. Manufacturer Model No. Peak Gain NOTE
1
MAG.LAYERS MSA-3420-25GC4-A1
-B160MM
2.37 dBi in 2.4GHz
without metal reflector
(High CTL Power)
2
MAG.LAYERS MSA-3414-25GC4-A1
-B160MM-RF
3.97 dBi in 2.4GHz
with metal reflector
(Low CTL Power)
NOTE:
1. There are two different EUT output power for with ground plane antenna and
without ground plane antenna.
2. About Output power, please refer to present document page 4: Functional Specifications.