User's Manual

Professional installation instruction
Please be advised that due to the unique function supplied by this product, the device is
intended for use with our interactive entertainment software and licensed third-party only.
The product will be distributed through controlled distribution channel and installed by
trained professional and will not be sold directly to the general public through retail store.
1. Installation personal
This product is designed for specific application and needs to be installed by a qualified
personal who has RF and related rule knowledge. The general user shall not attempt to
install or change the setting.
2. Installation location
The product shall be installed at a location where the radiating antenna can be kept
20cm from nearby person in normal operation condition to meet regulatory RF exposure
requirement.
3. External antenna
Use only the antennas which have been approved by the applicant. The non-approved
antenna(s) may produce unwanted spurious or excessive RF transmitting power which
may lead to the violation of FCC limit and is prohibited.
4. Installation procedure
Please refer to user’s manual for the detail.
5. Warning
Please carefully select the installation position and make sure that the final output power
does not exceed the limit set force in relevant rules. The violation of the rule could lead to
serious federal penalty.
The following maximum Transmit powers should be observed during configuration.
PIFA Antenna 1
802.11b 802.11g 802.11n 20M 802.1n 40M
(MSA-3420-25GC4-A1-B160MM) 20.3 dBm 25.6 dBm 25.3 dBm 22.3 dBm
PIFA Antenna 2
802.11b 802.11g 802.11n 20M 802.1n 40M
(MSA-3414-25GC4-A1-B160MM-RF) 20.3 dBm 25.6 dBm 25.3 dBm 22.3 dBm
At these levels the panel antenna can be used only on point to point application. Point to
Multi-points is not allowed, and may require further reductions to meet local regulations.