Specifications

XP600/1100 INSTALLATION AND OPERATION MANUAL
Page 8
full power for every 10 degrees C over 40 degress C. IE; 80% of
normal capacity at 50 degrees C. . . . etc. .
DC INPUTS:
REMOTE ON/OFF:
AC OUTPUTS:
* XP-1100, XP-600 230 VAC
COOLING:
DC POWER ON LED:
LOW BATT / THERM BUZZER:
Positive (+) and Negative (-) input terminals are 5/16"
studs with brass hardware. They are accessed under the Rear
Cover. Use Appendix “A” to choose the appropriate gauge wire for
your specific model.
provides the User with a remote method to turn
the inverter on and off. “REMOTE” connection is on the barrier
terminal strip located under the Rear Cover.
All models (*except 230 VAC output) have two,
NEMA -15 outlets (standard wall receptacle), located on the Front
Panel. Additionally; may be hard-wired to appliance / load using
connections on the barrier terminal strip, located under Rear Cover.
, inverters have an IEC-320 receptacle
located on the Front Plate.
is provided by a thermostatically controlled brushless fan
located on the Front Panel.
located on the front panel, will be "ON" when
inverter is powered up, and DC power is available.
produces an audible alarm if DC
input voltage falls to a level within 2% to 4% of the low limit of
inverter, or, if there is an over temperature condition.
.
.
.
.
.
.
Standard Features
2.0