Specifications

XP600/1100 INSTALLATION AND OPERATION MANUAL
Make DC input connections to the inverter as illustrated in
Appendix “C”.
(Optional) Using 12-18 AWG wire, make Remote On/Off
connection from the Rear Panel terminal labeled “REMOTE” to
one pole of a small toggle switch. Then from the other pole of
toggle switch, make a connection to battery negative (-).
Make sure the toggle switch is off.
Note: in order for the Remote On/Off switch to operate inverter,
On/Off switch on the Front Panel must be off.
If the Appliance / Load will be hard wired to the inverter instead of,
or in addition to, using the outlets provided on the Front Panel, see
Appendix “C”.
2.
3.
4.
5.
.
.
.
.
.
Page 13