Specifications

XP600/1100 INSTALLATION AND OPERATION MANUAL
Page 10
voltage as required, to limit current to a safe level. The overpower
protection circuit will recover instantly when the overpower condition
clears. The third, is short circuit protection. If the over current
condition is so severe that it causes output voltage to collapse to 1
Vp for more than 1 second, the inverter will shut down and not auto-
matically restart. This requires the user to clear the short circuit
safely, and guarantee that hazardous voltage will not come back on
line until desired. To reset the inverter from this condition, cycle
power switch “OFF” then “ON” again. .