Specifications

iability
Innovative Circuit Technology Ltd.
26921 Gloucester Way, Langley, BC, Canada V4W 3
Y3
Tel: [phone] | Fax: [phone] | Email: [e-mail] | www.ict-power.com
Page 2
800-343-000
ICT logos and slogans © copyright Innovative Circuit Technology Ltd. Specifications subject to change without notice.
Designed to UL/CSA60950, FCC Class B, CE EMC Directive
Standards
Continuous Output Current - 12V
50A
Power Specifications
25A
12.5A
13.8VDC
27.6VDC
Efficiency (typical) - 12V 90%
91%
93%
Continuous Output Current - 24V
Continuous Output Current - 48V
Efficiency (typical) - 24V
Efficiency (typical) - 48V
Output Voltage - 12V
Output Voltage - 24V
-20 C to +60 C
(derate >50 C)
o o
Operating Temperature Range
Temperature Controlled Fans (side to side airflow)
@ 240VAC
@ 240VAC
@ 240VAC
Warranty
Over-Temperature, DC Over-Current, AC Input Voltage, DC Output Voltage,
System Fault
Protection Features
Mechanical
1RU - 19” Rack Mount
IEC C14 Connector
7.4 lbs
Form Factor
Dimensions (inches) L x W x H
Weight
Remote Alarm Connectors
AC Input Connectors
DC Output Connectors
Busbars with 5/16” Nuts & Washers
6.4 x 19.0 x 1.72
Terminal Block (#22 to #26 AWG)
Ordering Information - All models are Configured To Order (CTO) at the factory. Options must be selected at time of ordering.
DESCRIPTION
12VDC Output 24VDC Output 48VDC Output
Power supply with factory-installed battery backup terminal, automatic revert
and integrated low voltage disconnect.
Pro Series Power Supply
ICT690-24SBICT690-12SB ICT690-48SB
ICT690-24SICT690-12S ICT690-48S
Form C Alarm Contacts - Normally Open, Normally Closed, Common
Remote Communications
Remote Shutdown - 2.5 to 16 Volt Signal
Input Voltage Range
Frequency Range
Power Factor (typical)
Output Ripple - 12V
100-264VAC
50/60Hz
0.99
20mV RMS
Line Regulation
Load Regulation
+/- 0.1%
+/- 1.0%
Output Ripple - 24V
30mV RMS
Output Ripple - 48V
60mV RMS
55.2VDCOutput Voltage - 48V
Options
Battery Backup
12V 24V
LVD Disconnect Voltage
LVD Reconnect Voltage
10.5V
21.0V
12.0V
24.0V
48V
42.0V
48.0V
(Output voltage factory adjustable by specifying at time of order)
Factory-installed third terminal output for float charging
batteries. Provides automatic revert function. Includ
es
low voltage disconnect with factory-set disconnect and
reconnect voltage setpoints.
To find out more about the Pro Series and other DC Site Power solutions from ICT including TCP/IP Ethernet remote managed solutions,
contact our office
Output Grounding Positive, negative or floating
o
PRO SERIES
AC/DC Power Supply 1RU: 690 Watts