Instruction manual

6
Note:
Float charging/LVD option is designated by the suffix B (eg. ICT1200-
12SB).
Ethernet option is designated by the suffix C (eg. ICT1200-12SC).
Both options are designated by the suffix BC (eg. ICT1200-12SBC).
2. INSTALLATION
2.1.
Initial Inspection
Perform a quick physical check on the unit once it has been taken out
of the box to confirm it has not been damaged in shipping, and then
check for the included parts and accessories to make sure they are
present.
Your Digital Series unit comes complete with:
• AC input wire clamp input connector plug (3pin), and 7 pin
REMOTE connector plug
• DC output bus bar cover and mounting hardware (installed)
• Three Bus bar bolts with locking nuts for output wiring
• Two rack mounting ears and hardware to mount to the power
supply chassis (installed)
•
Instruction Manual
Model
Watts
(Max)
Input
VAC
Output
VDC
Output
(A)
Description
ICT1200-12S 1350 100-265 11.5 - 15.5 100
12VDC 100A
Power Supply
Model
Watts
(Max)
Input
VAC
Output
VDC
Output
(A)
Description
ICT1200-24S 1350 100-265 23 - 31.0 50
24VDC 50A
Power Supply
ICT1200-48S 1350 100-265 47- 62.0 25
48VDC 25A
Power Supply
ICT600-12S 675 100-265 11.5 – 15.5 50
12VDC 50A
Power Supply
ICT600-24S 675 100-265 23 – 31.0 25
24VDC 25A
Power Supply
ICT600-48S 675 100-265 47 – 62.0 12.5
48VDC 12A
Power Supply