Instruction manual

34
NOTICE!
If you are using a Dynamic IP address, your WAN IP
Address may change from time to time without warning, depending
on your ISP. You may want to obtain a Static IP address from your
ISP, which will be more convenient to use to access the panel from a
remote location. A Static IP address is a fixed IP address that will not
change. Alternatively, if a Static IP address is not available, you can
use a Dynamic DNS service such as DynDNS.com (see
www.dyndns.com
).
To access the panel over the Internet, type the WAN IP Address of the
router in the location/address field of your browser, followed by a colon
and the HTTP port number that the panel is using (e.g.
http://209.123.10.33:8000 for IP Address 209.123.10.33, Port 8000).
The Web server panel should then appear, as shown below:
5.9.
Text Message Alarm Notifications
The Digital Series Power Supply can send text message alarm
notifications to a cell phone by sending the alarm e-mail to an
address at the mobile phone provider. On the Network Setup
page,
enter the address for your phone in one of the “To” E-mail Address
fields. For example, to send a text message to an AT&T phone, enter
[e-mail]
, replacing cell number
with your cell phone
number.
Here are some address formats for other mobile phone providers:
AT&T [e-mail]
Verizon [e-mail]
T-Mobile [e-mail]