Manual I
Table of Contents First Steps ............................................................................................................ 4 Let your itablet acclimatise itself ................................................................................... 4 Where to use your itablet ............................................................................................... 4 Introduction ..........................................................................................................
Safety Notices ² ² ² ² ² ² ² ² ² Please read these safety instructions carefully. All precautions and warnings on the equipment should be carefully noted. Please disconnect the computer from the AC outlet before cleaning. Never pour any liquids into any openings or directly onto the computer unit. This could result in fire or electrical shock. Do not use in around water or other liquids. Ensure the voltage range of the power outlet is between 100V and 240V before connecting the computer unit.
Federal Communications Commission Notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual may cause harmful interference to radio communications.
End-users and installers must be provide with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. SAR Value: 0.
BEEFFO E YO RE T OR RT U ST AR OU TA This manual will help you get the most from your itablet. If you are a less experienced user, please read through the manual carefully before starting. First Steps Let your itablet acclimatise itself Do not power up your system immediately if it has been exposed to hot or cold conditions. Instead, allow the system to adjust gradually to room temperature over a three to four hour period.
INNTTRRO N ON TIIO CT UC DU OD Introducing Your itablet Your itablet features the latest advances in portable computing technology with a modular design that provides maximum expandability without compromising portability. Never try to disassemble or back engineer your itablet as we will not be responsible for any damage caused if you do so and this action would void your warranty Unpacking your itablet Your itablet comes securely packaged in a shipping carton.
Getting To Know Your itablet Front View 1.CMOS Camera This is the built-in camera which can be used for video conferencing applications or just taking pictures.
2. LED Indicator 1. Power Indicator • Lights up when your itablet is turned on. 2. Wifi Indicator • Lights up when the wifi device is turned on. 3.
Left View 1.Power button Press to turn on your itablet 2.USB Ports The Universal Serial Bus (USB2.0-compliant) ports allow you to connect a wide variety of devices to your itablet at rates of up to 480 Mbps. These ports conform to the latest USB2.0 plug-and-play standards 3.Microphone Jack This 3.5mm socket is where you connect a microphone 4.Stereo Headphone The stereo headphone jack (3.5-mm diameter) is where you connect the headphones or external speakers. 5.
Back View 1.Sim card slot (option) This is where you can nsert a sim card to use the 3G function. 2. 3 in1 Card reader SD, MS, MMS card reader. (please note that card converters may be required) Front View 1.
GEETTTTIINNG G ST D ED TE RT AR TA Setting Up Your itablet ¾ ¾ ¾ ¾ Remove your itablet from its package. Insert the battery pack into your itablet so it can start charging. Connect your itablet to an external power source and fully charge battery. Press the power on button. Connecting Your itablet To An External Power Source ¾ ¾ Plug the AC adapter cable into the AC power connector on the computer. Plug one end of the power cord into an electrical outlet and the other end into the AC adapter.
Using the OnScreen Keypad The Onscreen Keypad and Writing Pad application is only supported if your operating system is Windows 7 Home Premium or above. Looking at the windows display, the onscreen keypad icon is located on the left side of the screen. Drag the icon out and double click to display the keypad. Writing pad Use this pad to write text that is converted into typed text. Write on the lines in the writing pad as if you were writing on a lined sheet of paper.
Onscreen Keyboard The OnScreen Keyboard application is supported if your operating system is Windows 7 or above. Use the onscreen keyboard in the same way that you would use a standard keyboard. System Recovery When you start using your itablet, we suggest that you make a rescue disk to back up your itablet. This will enable you to restore your itablet should a problem occur. If your Operating system becomes corrupted follow this guide to perform a system recovery. First turn on the power.
When this display appears on your screen, press F11 when prompted to execute the iTablet Recovery procedure. Windows 7 will then clear up all the files on your C disk and return to the original operating system. Warning this will delete any user data, please backup if possible before use.
The recovery process is now underway. Alternatively, you can reinstall your Windows operating system. From Control Panel, select the “Advanced Recovery Methods” to reinstall Windows.
Select “Reinstall Windows” Select “Restart” to restart your itablet and start the installation process.
3G/3.5G Module U6300 Card (Optional) 3G/3.5G will be enabled if this card is installed. 3G/3.5G will be disabled if this card is not installed. You should insert the 3G SIM card before powering up your itablet otherwise it will not detect the card if you try to run the 3G application.
TRRO G NG TIIN OT OO HO SH ES LE BL UB OU This chapter describes how to locate and solve problems that you may experience when using your itablet. General Hardware Problems / Possible Causes and Solutions Here are a few common hardware problems and suggested solutions: A freeze on the system during program operation ¾ Should an error occur when a program is being used, press the , , and keys simultaneously. ¾ In the event of an error with the Windows OS, reboot your itablet.
What are the major steps to follow when your itablet does not turn on properly after a shutdown If your itablet turns on after connecting the AC adapter, this indicates that the battery needs recharging. How to extend battery life ¾ Adjust the display brightness to minimum level. ¾ Adjust the volume to minimum level. The wireless LAN connection disconnects after 2~3 minutes and does not reconnect. This may be caused by channel interference. Try changing the access point channel and reconnect.
Contacting Your Dealer If you still have a problem after reading the preceding section, your next step is to contact your dealer who will be able to determine if the itablet needs to be returned to . Before you call your dealer, please have the following information available: ¾ How is your itablet configured? ¾ What peripheral devices you are using.
SPPEECCIIFFIICCAATTIIO S NS ON Photo Platform CPU Cooling Method Memory Mass Storage Intel Atom Menlow-XL Z530 1.6GHz Passive Memory 2GB DDR2 SDRAM Storage Pata IDE 1.8” SSD 32 G(MLC flash) Card Reader Display Controller LCD Display SD Card LCD Multi touch panel controller 10.1" 1024X600 Glare type panel, LED backlight Video External Display Camera HDMI Camera 2M(Built-in) Built in stereo speakers Audio Audio Features Build in analogue microphone where location ? Stereo headphones (3.
802.11 b/g/n WiFi Communication Other I/O Devices Bluetooth 3G (option) Keyboard Sensors NA Accelerometer Ambient light sensor DC-in Jack I/O Ports External connectors 3.5mm stereo headphone socket USB 2.0 Ports x 3 AC/DC Adapter Power System AC 110~220Volt, 12V 3.A ? Color : Black Battery Pack 4200m AH Power Management yes Dimension Weight OS 270.3x169x18 1.